YGB Bearing Co.,Ltd
YGB Bearing Co.,Ltd
Add to Cart
Original fag motor bearing 6012ZZ deep groove ball bearing 6012-2RS bearing Sizes 60*95*18mm
Description :
| Brand | FAG bearing |
| Model NO. | ball bearing 6012-c-2HRS |
| Type | FAG deep groove ball bearing |
| Bore size | 60mm |
| Outer diameter | 95mm |
| Thickness | 18mm |
| Seal type | Iron seal/Rubber seal |
| Feature | Low-noise/High-load/Long-life |
The Drawing:
1: FAG Deep Groove Ball Bearing Information:
FAG Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high-speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip (Contact Suffix LLU). Or, non-contact with the inner ring is by labyrinth seal (Non-contact Suffix LLB) to provide positive sealing at all times.
2. Deep Groove Ball Bearing Protection:
1. The installation is correct, that affects precision, life, performance. And fill the bearing with lubricant after installation.
2. Don't allow strong impact, such as hammer striking, transfer roller pressure
3. Use the accurate installation tool, avoid to use cloth kind and short fibers
4.Lubricate the bearing to avoid rust with high-quality mineral oil, especially in summer
5. General inspection, such as the surrounding temperature, vibrate, noise inspection
6. Keep bearing cleaning from dirt, dust, pollutant, moisture.
7. Bearing should not be ultra cooled.
3: Deep Groove Ball Bearing Application:
This bearings can be used: After sewing equipment, machine tool spindles, plug-in, ordinary type cooling tower, resistance welding machine, aging furnace, hobbing machine, environmental protection equipment, whirlpool pump, ceramics engraving machine, metal packaging machinery, fishing machinery, high-pressure reactor, offset printing, aerospace, rubber granulating machine, plastic machine, chip conveyor, and so on purpose.
Series Models:
| New Items | Old Items | Specifications(dxDxB) | Weight/kg |
| 61900 | 1000900 | 10*22*6 | 0.0078 |
| 61901 | 1000901 | 12*24*6 | 0.0099 |
| 61902 | 1000902 | 15*28*7 | 0.0158 |
| 61903 | 1000903 | 17*30*7 | 0.0166 |
| 61904 | 1000904 | 20*37*9 | 0.0358 |
| 61905 | 1000905 | 25*42*9 | 0.0409 |
| 61906 | 1000906 | 30*47*9 | 0.0513 |
| 61907 | 1000907 | 35*55*10 | 0.078 |
| 61908 | 1000908 | 40*52*12 | 0.112 |
| 61909 | 1000909 | 45*68*12 | 0.0139 |
| 61911 | 1000911 | 55*80*13 | 0.179 |
| 61912 | 1000912 | 60*85*13 | 0.193 |
| 61913 | 1000913 | 65*90*13 | 0.206 |
| 61914 | 1000914 | 70*100*16 | 0.341 |
| 61915 | 1000915 | 75*105*16 | 0.362 |
| 61916 | 1000916 | 80*110*16 | 0.381 |
| 61917 | 1000917 | 85*120*8 | 0.527 |
| 61918 | 1000918 | 90*125*8 | 0.559 |
| 61919 | 1000919 | 95*130*18 | 0.586 |
| 61920 | 1000920 | 100*140*20 | 0.786 |
| 61921 | 1000921 | 105*145*20 | 0.805 |
| 61922 | 1000922 | 110*150*20 | 0.84 |
| 61924 | 1000924 | 120*165*22 | 1.15 |
| 61926 | 1000926 | 130*180*24 | 1.56 |
| 61928 | 1000928 | 140*190*24 | 1.7 |
Basic Information:
Single row radial ball bearings are the most widely used bearings
which makes these bearings suitable for radial loads or a combination of thrust and radial loads. This design permits precision tolerances even at high-speed operation.
Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring.
This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter.
Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring.
Contact with the inner ring is by sealing lip (Contact Suffix RS). Or, non-contact with the inner ring is by labyrinth seal (Non-contact Suffix LLB) to provide positive sealing at all times.
Payment:
1: T/T: 30% as deposit and 70% balance after getting a copy of B/L.
2: L/C (cannot for branded bearings.)
3: Discuss together between buyer and supplier.
Contact us:
Dear friend, any questions please feel free to contact us, welcome to inquiry!